Below you will find the best synthetic oil for a 1988 Ford Trucks F250. Maximize your vehicle's potential with 100% full synthetic oil that is made in the USA! For more than the past 50 years, AMSOIL has perfected the art of maximizing efficiency and engine life. The advanced synthetic formulas deliver superior protection from heat, friction, and wear, keeping engines as good as new for miles. Upgrade to AMSOIL today and experience better performance, reliability, and reduced oil consumption. Click add to cart for more details. Sign up as a preferred customer and get discounts and more! The oil type, capacity and oil filter (if available) are listed below and verified for accuracy. Upgrade now!
Recommended oil for my 1988 F250
| Product Name | Product Description | Capacities | Product |
|---|---|---|---|
| Signature Series 5W-30 Synthetic Motor Oil | Save time and money and costly repairs at the auto shop! Amsoil has your back! Bullet proof your F250's engine! | With filter 6 quarts When refilling, remove dipstick to provide adequate venting and allow oil to flow into crankcase. After refill, check oil level. Top off to proper level as needed. |
ASLQT-EA
Add To Cart  Add To Cart |
| XL 5W-30 Synthetic Motor Oil | Protect your F250 with the best synthetic oil! Amsoil backs up all claims with proof! Support American Oil! | With filter 6 quarts When refilling, remove dipstick to provide adequate venting and allow oil to flow into crankcase. After refill, check oil level. Top off to proper level as needed. |
XLFQT-EA
Add To Cart Add To Cart |
| OE 5W-30 Synthetic Motor Oil | AMSOIL OE Synthetic Motor Oil is specially made for the extended oil change intervals recommended for your 1988 Ford Trucks F250 7.5L. It has advanced synthetic technology that resists chemical breakdown for maximum wear protection for your vehicle which is well beyond the traditional 3,000-mile oil change interval. | With filter 6 quarts When refilling, remove dipstick to provide adequate venting and allow oil to flow into crankcase. After refill, check oil level. Top off to proper level as needed. |
OEFQT-EA
Add To Cart Add To Cart |
Recommended oil filters for my 1988 F250
| Product Name | Product Description | Product |
|---|---|---|
| AMSOIL Ea Oil Filters | This filter is for your 1988 Ford Trucks F250 and is designed to last up to 25k (normal conditions) or 15k miles (severe conditions) or 1 year, whichever comes first. |
EAO15-EA
Add To Cart Add To Cart |
Recommended transmission fluids for my 1988 F250
| Product Name | Note | Capacities | Product Description | Product |
|---|---|---|---|---|
| Signature Series Multi-Vehicle Synthetic Automatic Transmission Fluid | Automatic Transmission Fluid (1) This specification has been updated from Mercon to Mercon V per TSB 06-14-4 |
S5-42 (5-SPD) 6.8 pints
4 speed AOD Total Fill 12.3 quarts
3 quarts Initial Fill
3 speed C6 Total Fill 11.8 quarts
5.9 quarts Initial Fill |
Amsoil's Signature Series Multi-Vehicle Synthetic automatic transmission fluid is made to blow the doors off any regular or conventional ATF fluids on the market and our oil surpasses the performance needs of most vehicles. Protect your transmission and avoid costly repairs. This fluid has an advanced formula to give awesome top-notch protection under harsh operating conditions. Transmission repairs are expensive so protect your vehicle with this great fluid! |
ATFPK-EA
Add To Cart Add To Cart |
| OE Multi-Vehicle Synthetic Automatic Transmission Fluid | Automatic Transmission Fluid (1) This specification has been updated from Mercon to Mercon V per TSB 06-14-4 |
S5-42 (5-SPD) 6.8 pints
4 speed AOD Total Fill 12.3 quarts
3 quarts Initial Fill
3 speed C6 Total Fill 11.8 quarts
5.9 quarts Initial Fill |
Outsanding protection and resists varnish! Change interval based on your F250's recommendation. |
OTFQT-EA
Add To Cart Add To Cart |
| Torque-Drive® Synthetic Automatic Transmission Fluid | Automatic Transmission Fluid (1) This specification has been updated from Mercon to Mercon V per TSB 06-14-4 |
S5-42 (5-SPD) 6.8 pints
4 speed AOD Total Fill 12.3 quarts
3 quarts Initial Fill
3 speed C6 Total Fill 11.8 quarts
5.9 quarts Initial Fill |
Awesome protection under extreme temperature! Protect heavy-duty transmissions with this made in the USA oil. Follow the service interval in your owner's manual. Protect your Ford Trucks. |
ATD1G-EA
Add To Cart Add To Cart |
Differential for my Ford Trucks F250
| Product Name | Note | Capacities | Product Description | Product |
|---|---|---|---|---|
| SEVERE GEAR® 80W-90 |
Dana 44 Front 3.6 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Dana 50 Front 3.8 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Dana 60 Front 5.9 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Dana 60 Rear 5.9 pints
Dana 60, 61 Rear 5.9 pints
Dana 60-IU Rear 6.3 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Dana 70 HD Rear 7.4 pints
Dana 70-2U Rear 6.6 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Dana 80 Rear 8.5 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Ford 10.25 RG Rear 7.4 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
With 8.8 or 9 RG Rear 5.5 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole. |
This lube is made to exceed the requirements of equipment and all vehicles that require SAE 80W-90 viscosity. It is made with synthetic base oils and top additives without adding any wax. Amsoil Severe Gear is solid against thermal breakdown. Will give you awesome protection for bearings and gears and tough against heat which will help extend the life of your equipment and avoid costly repairs. Made in the U.S.A. |
AGLPK-EA
Add To Cart Add To Cart |
|
| SEVERE GEAR® 75W-90 |
Dana 44 Front 3.6 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Dana 50 Front 3.8 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Dana 60 Front 5.9 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Dana 60 Rear 5.9 pints
Dana 60, 61 Rear 5.9 pints
Dana 60-IU Rear 6.3 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Dana 70 HD Rear 7.4 pints
Dana 70-2U Rear 6.6 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Dana 80 Rear 8.5 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Ford 10.25 RG Rear 7.4 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
With 8.8 or 9 RG Rear 5.5 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole. |
This special formula is made for harsh operating conditions that pick-up trucks endure. Also top-notch protection for SUVs, heavy equipment, and other heavy-duty vehicles. Made in the USA. |
SVGPK-EA
Add To Cart Add To Cart |
|
| SEVERE GEAR® 75W-110 |
Dana 44 Front 3.6 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Dana 50 Front 3.8 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Dana 60 Front 5.9 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Dana 60 Rear 5.9 pints
Dana 60, 61 Rear 5.9 pints
Dana 60-IU Rear 6.3 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Dana 70 HD Rear 7.4 pints
Dana 70-2U Rear 6.6 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Dana 80 Rear 8.5 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Ford 10.25 RG Rear 7.4 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
With 8.8 or 9 RG Rear 5.5 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole. |
This is a fantastic lubricant for towing trailers, heavy duty hauling, off road driving/4x4, commercial applications, and for race enthusiasts. This severe gear lube will protect bearings, gears from friction and exceeds performance of any regular gear oil out there! Keep your truck or vehicle out of the shop and avoid costly repairs with this made in the USA lube. |
SVTPK-EA
Add To Cart Add To Cart |
Recommended coolants for my Ford Trucks F250
| Product Name | Product Description | Capacities | Product |
|---|---|---|---|
| Passenger Car & Light Truck Antifreeze & Coolant | maximum protection for your 1988 Ford Trucks F250 under extreme temperatures and operating conditions! Lasts up to 150,000 miles or five years! (whichever comes first) |
ANTPC1G-EA
Add To Cart Add To Cart |
|
| Low Toxicity Antifreeze and Engine Coolant | Lasts in your 1988 Ford Trucks F250 for up to 150,000 miles or five years! (whichever comes first). Biodegradable! |
ANT1G-EA
Add To Cart Add To Cart |
Treat your vehicle with outstanding engine protection! Use Amsoil for increased performance, extended drain intervals, longer engine life, better gas mileage, cooler running engine & increased horsepower plus lower emissions . In addition to this you will have less expenses for maintentance and repairs. Bonus! Less dumping of oil which is better for the environment. If millions of people change their oil less, that is less waste disposed!
