Below you will find the best synthetic oil for a 1986 Ford Trucks F250. Maximize your vehicle's potential with 100% full synthetic oil that is made in the USA! For more than the past 50 years, AMSOIL has perfected the art of maximizing efficiency and engine life. The advanced synthetic formulas deliver superior protection from heat, friction, and wear, keeping engines as good as new for miles. Upgrade to AMSOIL today and experience better performance, reliability, and reduced oil consumption. Click add to cart for more details. Sign up as a preferred customer and get discounts and more! The oil type, capacity and oil filter (if available) are listed below and verified for accuracy. Upgrade now!
Recommended oil for my 1986 F250
| Product Name | Product Description | Capacities | Product |
|---|---|---|---|
| Signature Series Max-Duty Synthetic Diesel Oil 15W-40 | Our top-grade synthetic diesel oil! Get the best synthetic diesel oil for your 1986 Ford Trucks F250 6.9L engine and confidently extend drain intervals! Provides six times better wear protection than required by the Detroit Diesel DD13 Scuffing Test for Specification DFS 93K222. Heavy-Duty On-/Off-Road: Three times (3X) OEM1 recommendation, not to exceed 60,000 miles/600 hours or oneyear, whichever comes first. Turbodiesel Pickup: Two times (2X) OEM1 recommendation, not to exceed 25,000 miles or one year, whichever comes first. Gasoline Engine S | With filter 9.8 quarts When refilling, remove dipstick to provide adequate venting and allow oil to flow into crankcase. After refill, check oil level. Top off to proper level as needed. |
DMEQT-EA
Add To Cart  Add To Cart |
| Heavy-Duty Synthetic Diesel Oil 15W-40 | AMSOIL Heavy-Duty Synthetic Diesel Oil is a special formula made for your hard-working equipment. It is engineered to provide four times better wear protection for your 1986 Ford Trucks. Check your owner's manual for the oil change interval. This is the best synthetic diesel oil for your Ford Trucks and be sure to get an awesome oil filter. | With filter 9.8 quarts When refilling, remove dipstick to provide adequate venting and allow oil to flow into crankcase. After refill, check oil level. Top off to proper level as needed. |
ADPQT-EA
Add To Cart Add To Cart |
Recommended oil filters for my 1986 F250
| Product Name | Product Description | Product |
|---|---|---|
| WIX Oil Filter | Wix oil filters for your 1986 Ford Trucks F250 have extended OEM recommendations which match the drain intervals of AMSOIL XL synthetic motor oil which is 12k or 1 year, whichever is first. |
51742-EA
Add To Cart Add To Cart |
Recommended transmission fluids for my 1986 F250
| Product Name | Note | Capacities | Product Description | Product |
|---|---|---|---|---|
| Signature Series Multi-Vehicle Synthetic Automatic Transmission Fluid | Automatic Transmission Fluid (1) This specification has been updated from Mercon to Mercon V per TSB 06-14-4 |
3 quarts Initial Fill
4 speed AOD Total Fill 12.3 quarts
3 speed C6 Total Fill 11.8 quarts
5.9 quarts Initial Fill |
Amsoil's Signature Series Multi-Vehicle Synthetic automatic transmission fluid is made to blow the doors off any regular or conventional ATF fluids on the market and our oil surpasses the performance needs of most vehicles. Protect your transmission and avoid costly repairs. This fluid has an advanced formula to give awesome top-notch protection under harsh operating conditions. Transmission repairs are expensive so protect your vehicle with this great fluid! |
ATFPK-EA
Add To Cart Add To Cart |
| OE Multi-Vehicle Synthetic Automatic Transmission Fluid | Automatic Transmission Fluid (1) This specification has been updated from Mercon to Mercon V per TSB 06-14-4 |
3 quarts Initial Fill
4 speed AOD Total Fill 12.3 quarts
3 speed C6 Total Fill 11.8 quarts
5.9 quarts Initial Fill |
Outsanding protection and resists varnish! Change interval based on your F250's recommendation. |
OTFQT-EA
Add To Cart Add To Cart |
| Torque-Drive® Synthetic Automatic Transmission Fluid | Automatic Transmission Fluid (1) This specification has been updated from Mercon to Mercon V per TSB 06-14-4 |
3 quarts Initial Fill
4 speed AOD Total Fill 12.3 quarts
3 speed C6 Total Fill 11.8 quarts
5.9 quarts Initial Fill |
Awesome protection under extreme temperature! Protect heavy-duty transmissions with this made in the USA oil. Follow the service interval in your owner's manual. Protect your Ford Trucks. |
ATD1G-EA
Add To Cart Add To Cart |
Differential for my Ford Trucks F250
| Product Name | Note | Capacities | Product Description | Product |
|---|---|---|---|---|
| SEVERE GEAR® 80W-90 |
Dana 44 Front 3.6 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Dana 50 Front 3.8 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Dana 60 Front 5.9 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Dana 60, 61 Rear 5.9 pints
Dana 70 HD Rear 7.4 pints
Dana 70-2U Rear 6.6 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Dana 80 Rear 8.2 pints
Dana 80 Rear 8.5 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Ford 10.25 RG Rear 7.4 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Ford 8.8 or 9 RG Rear 5.5 pints
With 8.8 or 9 RG Rear 5.5 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole. |
This lube is made to exceed the requirements of equipment and all vehicles that require SAE 80W-90 viscosity. It is made with synthetic base oils and top additives without adding any wax. Amsoil Severe Gear is solid against thermal breakdown. Will give you awesome protection for bearings and gears and tough against heat which will help extend the life of your equipment and avoid costly repairs. Made in the U.S.A. |
AGLPK-EA
Add To Cart Add To Cart |
|
| SEVERE GEAR® 75W-90 |
Dana 44 Front 3.6 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Dana 50 Front 3.8 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Dana 60 Front 5.9 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Dana 60, 61 Rear 5.9 pints
Dana 70 HD Rear 7.4 pints
Dana 70-2U Rear 6.6 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Dana 80 Rear 8.2 pints
Dana 80 Rear 8.5 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Ford 10.25 RG Rear 7.4 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Ford 8.8 or 9 RG Rear 5.5 pints
With 8.8 or 9 RG Rear 5.5 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole. |
This special formula is made for harsh operating conditions that pick-up trucks endure. Also top-notch protection for SUVs, heavy equipment, and other heavy-duty vehicles. Made in the USA. |
SVGPK-EA
Add To Cart Add To Cart |
|
| SEVERE GEAR® 75W-110 |
Dana 44 Front 3.6 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Dana 50 Front 3.8 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Dana 60 Front 5.9 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Dana 60, 61 Rear 5.9 pints
Dana 70 HD Rear 7.4 pints
Dana 70-2U Rear 6.6 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Dana 80 Rear 8.2 pints
Dana 80 Rear 8.5 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Ford 10.25 RG Rear 7.4 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole.
Ford 8.8 or 9 RG Rear 5.5 pints
With 8.8 or 9 RG Rear 5.5 pints Fill to no more than 1/4 to 9/16 inch below fill plug hole. |
This is a fantastic lubricant for towing trailers, heavy duty hauling, off road driving/4x4, commercial applications, and for race enthusiasts. This severe gear lube will protect bearings, gears from friction and exceeds performance of any regular gear oil out there! Keep your truck or vehicle out of the shop and avoid costly repairs with this made in the USA lube. |
SVTPK-EA
Add To Cart Add To Cart |
Recommended coolants for my Ford Trucks F250
| Product Name | Product Description | Capacities | Product |
|---|---|---|---|
| Passenger Car & Light Truck Antifreeze & Coolant | maximum protection for your 1986 Ford Trucks F250 under extreme temperatures and operating conditions! Lasts up to 150,000 miles or five years! (whichever comes first) |
ANTPC1G-EA
Add To Cart Add To Cart |
|
| Low Toxicity Antifreeze and Engine Coolant | Lasts in your 1986 Ford Trucks F250 for up to 150,000 miles or five years! (whichever comes first). Biodegradable! |
ANT1G-EA
Add To Cart Add To Cart |
Is ordering oil something you have considered but you do not know how to change your own car or trucks motor oil? No worries! Contact your local shop in your area and ask if you can bring your own oil. They should gladly accept and if they don't, that should be a red flag which means time to find someone else! It is very easy to find a local mechanic to put in Amsoil for you! This way you can enjoy your vehicle without going 3-4 times a year and wait an hour or so to change your car or truck's engine oil. Save time, money, and protect your engine today with the best synthetic motor oil made for your vehicle and it's made in the USA!
