Maintenance and Fluid Information for 2010 Toyota TUNDRA 5.7L
An oil change on the 2010 Toyota TUNDRA 5.7L starts with selecting the right lubricant. The catalog lists these engine-oil viscosity grades: 5W-20. The matching product listings include Signature Series 5W-20 Synthetic Motor Oil, XL 5W-20 Synthetic Motor Oil, OE 5W-20 Synthetic Motor Oil. The grade alone is not the whole specification, so check the manufacturer’s requirements before making your selection.
The service listing gives an oil quantity of 7.9 quarts with filter. Use that figure to plan the job, but check the level after filling rather than adding the entire amount without verifying it.
How often should I change the oil in my 2010 Toyota TUNDRA 5.7L?
Use the manufacturer’s maintenance schedule for this engine and operating conditions. The available application data does not establish an exact oil-change interval.
Which synthetic engine oils are listed for my 2010 Toyota TUNDRA 5.7L?
Synthetic engine-oil listings for this vehicle include 5W-20. A synthetic listing does not by itself mean the vehicle manufacturer requires full synthetic oil.
Which oil filter is listed for my 2010 Toyota TUNDRA 5.7L, and what is the filter number?
The oil-filter part numbers listed for this vehicle include EA15K04-EA, 57041-EA.
What gear lubricant is listed for my 2010 Toyota TUNDRA 5.7L?
The differential/gear-lubricant viscosities listed for this vehicle include 75W-90, 75W-110, 80W-90. These are catalog-listed gear-lubricant options, not interchangeable specifications; verify the correct axle, differential type, and manufacturer requirements before selecting one.
