Oil and Maintenance Guide for 2012 Can-Am Outlander Max 650 EFI XT-P 650
Before You Service the Engine
When servicing the engine on your 2012 Can-Am Outlander Max 650 EFI XT-P 650, it is important to verify the correct lubricant and refill method. Check the specific procedure for refilling and checking levels before you remove the drain plug, as a published capacity may not represent the exact amount required after a standard drain.
What type of oil does a 2012 Can-Am Outlander Max 650 EFI XT-P 650 take?
The engine-oil viscosity shown for this model is 10W-40. The available oil-product listings include Formula 4-Stroke Power Sports Synthetic Motor Oil, 10W-40 Synthetic ATV/UTV Engine Oil. For a service, choose oil that meets the engine’s actual application requirements, not just a product name.
How much oil does a 2012 Can-Am Outlander Max 650 EFI XT-P 650 take?
The engine oil capacity is listed at 2.32 quarts. Because the amount needed after a routine drain might vary from this figure, follow the proper level-check procedure during your refill.
Why does four-stroke engine oil need the right application rating?
Engine oils vary based on their additive packages and friction characteristics. Since some powersports engines use the same oil for both the engine and a wet clutch or transmission, you must match the manufacturer's specific requirements alongside the correct viscosity. This listing does not confirm the specific clutch design of your vehicle.
