Hands down, out of all of the formulations AMSOIL makes, the oil on this particular page is the absolute BEST. The 0W30 oil you see here right now is the exact oil I have been using in my last 4 vehicle and the same oil that I recommend to all of my family and friends. I've personally seen the oil consumption go away in my 2001 Camaro where I was using Mobil 1 synthetic after I switched to Amsoil 0W30. I noticed an immediate difference. When you place an order for oil for your passenger car, if it has less than 50,000 miles on it (without use of synthetic) or has over 50,000 but has had synthetic, then this should be the oil you will be ordering. Take note of the product code. Once you finish reading this article, come back up here and CLICK THIS LINK.

Authorized AMSOIL dealer of Fort Myers, Florida

Search this site

Amsoil - commercial, snowmobiles, weedeaters

Click here for WEB SITE MAP

Click a pull-down menu below for more information
AMSOIL Series 2000 Synthetic 0W-30 Motor Oil

Race-proven technology designed for passenger car performance. Provides unsurpassed fuel efficiency and up to twice the wear protection provided by popular conventional and synthetic motor oils. Recommended for use in all vehicles requiring 5W-20, 5W-30 or 10W-30 motor oils.

(Most commonly used for passenger cars, trucks & SUV's)

Product Code: TSO

 

AMSOIL Series 2000 Synthetic 0W-30 Motor Oil is Recommended for Applications Requiring the Following Specifications:

API SL, SH, SJ, CF
ILSAC GF-1, GF-2, GF-3
ACEA A-1, A-2, B-1, B-2
Chrysler MS-6395 H
Ford ESE M2C-153G
GM 4718M, 6094M
US MIL L-46167B
VW 505.00, 501.00
Mercedes Benz AG 226.1
JASO VTW Spec.

Product Description

Passenger car and light-truck engines today are built for fuel efficiency and power. AMSOIL Series 2000 Synthetic 0W-30 Motor Oil optimizes efficiency and power without the sacrifice in wear protection that comes with many fuel-efficient, low-viscosity oils.

Testing shows AMSOIL Series 2000 Synthetic 0W-30 Motor Oil dramatically outperforms popular conventional and synthetic motor oils of much higher viscosity in wear protection (see chart).

Fuel Efficient Formula

AMSOIL Series 2000 Synthetic 0W-30 Motor Oil efficiently transfers energy from the engine to the drivetrain. Its low coefficient of friction inhibits the energy loss to "drag" common to high viscosity oils.

Motorists seeking the ultimate in fuel efficiency may use AMSOIL Series 2000 Synthetic 0W-30 Motor Oil in place of higher viscosity motor oils.

High Temperature Protection

AMSOIL Series 2000 Synthetic 0W-30 Motor Oil protects in high temperatures better than do the high-viscosity conventional and synthetic oils tested (see chart). Even after extended service in the engine, Series 2000 Synthetic 0W-30 Motor Oil maintains its ability to protect in high temperatures.

Receive important AMSOIL information via Email
(Find out how to get special money-saving discounts on Amsoil, too!)

Choose which eCourse fits your needs:

First name: Last name:

Your email address:
Email addresses are NEVER given or sold to 3rd parties. We hate spam. We know you do, too!

Low Temperature Protection

AMSOIL Series 2000 Synthetic 0W-30 Motor Oil is specially formulated for superior cold temperature engine protection. Series 2000 retains excellent fluidity in extremely low temperatures, so it flows quickly and reliably to allow easy starting and immediate lubricating protection.

Motorists seeking cold temperature dependability and protection may use AMSOIL Series 2000 Synthetic 0W-30 Motor Oil in place of higher viscosity motor oils.

Heat Stability

AMSOIL Series 2000 Synthetic 0W-30 Motor Oil is highly resistant to volatility. For example, in heat that causes conventional motor oils to lose as much as 25 percent of their mass, AMSOIL Series 2000 Synthetic 0W-30 Motor Oil loses less than ten percent.

AMSOIL Series 2000 Synthetic 0W-30 Motor Oil's resistance to volatility keeps oil consumption extremely low and, more importantly, keeps the engine thoroughly lubricated and protected. Its resistance to volatility also helps keep fuel efficiency high and emissions low.

Clean Engine Formula

AMSOIL Series 2000 Synthetic 0W-30 Motor Oil remains free of sludge, varnish and other by-products of high temperature degradation. With no deposits to foul them, engines stay cleaner longer for top performance and efficiency and maximum service life.

Shear Stability

AMSOIL Series 2000 Synthetic 0W-30 Motor Oil is highly shear-resistant. With AMSOIL Series 2000 Synthetic 0W-30 Motor Oil's excellent viscosity retention, the protection that goes into the engine is the protection that stays in the engine, even over an extended course of severe service.

MIXING AMSOIL

AMSOIL Series 2000 Synthetic 0W-30 Motor Oil may be mixed with petroleum-based oils or other synthetic oils. However, a mixture of AMSOIL Series 2000 Synthetic 0W-30 Motor Oil and another oil may offer a shorter service life than pure AMSOIL Series 2000 Synthetic 0W-30 Motor Oil does.

SERVICE LIFE

In personal cars and light-duty trucks with non-turbocharged gasoline engines: change the oil at 35,000-mile or one-year intervals, whichever comes first.

In turbocharged gasoline engines and occasionally used gasoline engines: change the oil at intervals up to three times longer recommended by the engine manufacturer or six months, whichever comes first.

In high performance and racing engines: specified by Owner Experience/Oil Analysis.

Marine four-cycle gasoline engines and infrequently used automotive four-cycle gasoline engines: drain oil at intervals up to three times longer than those recommended by the engine manufacturer, or one year, whichever comes first.

In fleet and industrial engines: drain oil at intervals up to two times longer than recommended by the manufacturer, or six months, whichever comes first.

AMSOIL SUPER DUTY (SDF) Oil Filters should be changed at 12,500-mile or six-month intervals (whichever comes first) in gasoline engines. If a Hastings or other filter is used, filter should be changed at manufacturer's recommendation.

TYPICAL PHYSICAL PROPERTIES

 AMSOIL Series 2000 Synthetic 0W-30 Motor Oil (TSO)

Kinematic Viscosity @ 100°C, cSt (ASTM D-445)

11.3

Kinematic Viscosity @ 40°C, cSt (ASTM D-445)

57.3

Viscosity Index (ASTM D-2270)

196

Cold Crank Simulator Apparent Viscosity @ -30°C, cP (ASTM D 2602)

2993

Borderline Pumping Temperature °C (°F) (ASTM D3829)

-40 (-40)

Pour Point °C (°F) (ASTM D 92)

-51 (-60)

Flash Point °C (°F) (ASTM D 92)

226 (439)

Fire Point °C (°F) (ASTM D 92)

240 (464)

Noack Volatility (DIN 51581) 250°C for 1 hour, % weight loss

9.2

High Temperature/High Shear Viscosity cP, X°C, X s-1 (ASTM D4683)

3.5

Four-Ball Wear Test (ASTM D 4172: 40kgf, 150°C, 1800 rpm, 1 hr) Scar diameter, mm

0.373

Total Base Number

>11.0

If you are looking to make a purchase or wanting to become a dealer, please click the icon below. Amsoil products are primarily sold through catalog ordering. It's only $30 per year to become a dealer. If you wish to order at wholesale (25% less than the prices seen in the catalog), you can become a dealer or preferred customer to get the wholesale costs. The only way to get free shipping is to own a retail establishment and place an order exceeding $8,000. Otherwise if you live within a reasonable distance from one of the 14 warehouses in North America, you can drive in person. Shipping costs are so insignificant that it's often not worth the trouble to go to any warehouse. Since Amsoil has such a large account with UPS, they get a tremendous discount on shipping and pass it down to all of the customers.

AMSOIL is Proudly Made in the U.S.A. AMSOIL is America's Oil.
Authorize dealer of Florida

Robert Riley
Authorized AMSOIL Independent dealer
Amsoil Greenfield, Tennessee
Telephone (888) OIL-4CAR
Click here to send email